Go to the previous, next section.
A pipe is a mechanism for interprocess communication; data written to the pipe by one process can be read by another process. The data is handled in a first-in, first-out (FIFO) order. The pipe has no name; it is created for one use and both ends must be inherited from the single process which created the pipe.
A FIFO special file is similar to a pipe, but instead of being an anonymous, temporary connection, a FIFO has a name or names like any other file. Processes open the FIFO by name in order to communicate through it.
A pipe or FIFO has to be open at both ends simultaneously. If you read
from a pipe or FIFO file that doesn't have any processes writing to it
(perhaps because they have all closed the file, or exited), the read
returns end-of-file. Writing to a pipe or FIFO that doesn't have a
reading process is treated as an error condition; it generates a
SIGPIPE signal, and fails with error code EPIPE if the
signal is handled or blocked.
Neither pipes nor FIFO special files allow file positioning. Both reading and writing operations happen sequentially; reading from the beginning of the file and writing at the end.
The primitive for creating a pipe is the pipe function. This
creates both the reading and writing ends of the pipe. It is not very
useful for a single process to use a pipe to talk to itself. In typical
use, a process creates a pipe just before it forks one or more child
processes (see section Creating a Process). The pipe is then used for
communication either between the parent or child processes, or between
two sibling processes.
The pipe function is declared in the header file
`unistd.h'.
Function: int pipe (int filedes[2])
The pipe function creates a pipe and puts the file descriptors
for the reading and writing ends of the pipe (respectively) into
filedes[0] and filedes[1].
An easy way to remember that the input end comes first is that file
descriptor 0 is standard input, and file descriptor 1 is
standard output.
If successful, pipe returns a value of 0. On failure,
-1 is returned. The following errno error conditions are
defined for this function:
EMFILE
ENFILE
ENFILE.
Here is an example of a simple program that creates a pipe. This program
uses the fork function (see section Creating a Process) to create
a child process. The parent process writes data to the pipe, which is
read by the child process.
#include <sys/types.h>
#include <unistd.h>
#include <stdio.h>
#include <stdlib.h>
/* Read characters from the pipe and echo them to stdout. */
void
read_from_pipe (int file)
{
FILE *stream;
int c;
stream = fdopen (file, "r");
while ((c = fgetc (stream)) != EOF)
putchar (c);
fclose (stream);
}
/* Write some random text to the pipe. */
void
write_to_pipe (int file)
{
FILE *stream;
stream = fdopen (file, "w");
fprintf (stream, "hello, world!\n");
fprintf (stream, "goodbye, world!\n");
fclose (stream);
}
int
main (void)
{
pid_t pid;
int mypipe[2];
/* Create the pipe. */
if (pipe (mypipe))
{
fprintf (stderr, "Pipe failed.\n");
return EXIT_FAILURE;
}
/* Create the child process. */
pid = fork ();
if (pid == (pid_t) 0)
{
/* This is the child process. */
read_from_pipe (mypipe[0]);
return EXIT_SUCCESS;
}
else if (pid < (pid_t) 0)
{
/* The fork failed. */
fprintf (stderr, "Fork failed.\n");
return EXIT_FAILURE;
}
else
{
/* This is the parent process. */
write_to_pipe (mypipe[1]);
return EXIT_SUCCESS;
}
}
A common use of pipes is to send data to or receive data from a program
being run as subprocess. One way of doing this is by using a combination of
pipe (to create the pipe), fork (to create the subprocess),
dup2 (to force the subprocess to use the pipe as its standard input
or output channel), and exec (to execute the new program). Or,
you can use popen and pclose.
The advantage of using popen and pclose is that the
interface is much simpler and easier to use. But it doesn't offer as
much flexibility as using the low-level functions directly.
Function: FILE * popen (const char *command, const char *mode)
The popen function is closely related to the system
function; see section Running a Command. It executes the shell command
command as a subprocess. However, instead of waiting for the
command to complete, it creates a pipe to the subprocess and returns a
stream that corresponds to that pipe.
If you specify a mode argument of "r", you can read from the
stream to retrieve data from the standard output channel of the subprocess.
The subprocess inherits its standard input channel from the parent process.
Similarly, if you specify a mode argument of "w", you can
write to the stream to send data to the standard input channel of the
subprocess. The subprocess inherits its standard output channel from
the parent process.
In the event of an error, popen returns a null pointer. This
might happen if the pipe or stream cannot be created, if the subprocess
cannot be forked, or if the program cannot be executed.
Function: int pclose (FILE *stream)
The pclose function is used to close a stream created by popen.
It waits for the child process to terminate and returns its status value,
as for the system function.
Here is an example showing how to use popen and pclose to
filter output through another program, in this case the paging program
more.
#include <stdio.h>
#include <stdlib.h>
void
write_data (FILE * stream)
{
int i;
for (i = 0; i < 100; i++)
fprintf (stream, "%d\n", i);
if (ferror (stream))
{
fprintf (stderr, "Output to stream failed.\n");
exit (EXIT_FAILURE);
}
}
int
main (void)
{
FILE *output;
output = popen ("more", "w");
if (!output)
{
fprintf (stderr, "Could not run more.\n");
return EXIT_FAILURE;
}
write_data (output);
pclose (output);
return EXIT_SUCCESS;
}
A FIFO special file is similar to a pipe, except that it is created in a
different way. Instead of being an anonymous communications channel, a
FIFO special file is entered into the file system by calling
mkfifo.
Once you have created a FIFO special file in this way, any process can open it for reading or writing, in the same way as an ordinary file. However, it has to be open at both ends simultaneously before you can proceed to do any input or output operations on it. Opening a FIFO for reading normally blocks until some other process opens the same FIFO for writing, and vice versa.
The mkfifo function is declared in the header file
`sys/stat.h'.
Function: int mkfifo (const char *filename, mode_t mode)
The mkfifo function makes a FIFO special file with name
filename. The mode argument is used to set the file's
permissions; see section Assigning File Permissions.
The normal, successful return value from mkfifo is 0. In
the case of an error, -1 is returned. In addition to the usual
file name syntax errors (see section File Name Errors), the following
errno error conditions are defined for this function:
EEXIST
ENOSPC
EROFS
Reading or writing pipe data is atomic if the size of data written
is less than PIPE_BUF. This means that the data transfer seems
to be an instantaneous unit, in that nothing else in the system can
observe a state in which it is partially complete. Atomic I/O may not
begin right away (it may need to wait for buffer space or for data), but
once it does begin, it finishes immediately.
Reading or writing a larger amount of data may not be atomic; for example, output data from other processes sharing the descriptor may be interspersed.
See section Limits on File System Capacity, for information about the PIPE_BUF
parameter.
Go to the previous, next section.