Go to the previous, next section.
The GNU C Library provides pattern matching facilities for two kinds of patterns: regular expressions and file-name wildcards.
This section describes how to match a wildcard pattern against a particular string. The result is a yes or no answer: does the string fit the pattern or not. The symbols described here are all declared in `fnmatch.h'.
Function: int fnmatch (const char *pattern, const char *string, int flags)
This function tests whether the string string matches the pattern
pattern. It returns 0 if they do match; otherwise, it
returns the nonzero value FNM_NOMATCH. The arguments
pattern and string are both strings.
The argument flags is a combination of flag bits that alter the details of matching. See below for a list of the defined flags.
In the GNU C Library, fnmatch cannot experience an "error"---it
always returns an answer for whether the match succeeds. However, other
implementations of fnmatch might sometimes report "errors".
They would do so by returning nonzero values that are not equal to
FNM_NOMATCH.
These are the available flags for the flags argument:
FNM_FILE_NAME
FNM_PATHNAME
FNM_FILE_NAME; it comes from POSIX.2. We
don't recommend this name because we don't use the term "pathname" for
file names.
FNM_PERIOD
If you set both FNM_PERIOD and FNM_FILE_NAME, then the
special treatment applies to `.' following `/' as well as
to `.' at the beginning of string.
FNM_NOESCAPE
If you use FNM_NOESCAPE, then `\' is an ordinary character.
FNM_LEADING_DIR
If this flag is set, either `foo*' or `foobar' as a pattern would match the string `foobar/frobozz'.
FNM_CASEFOLD
The archetypal use of wildcards is for matching against the files in a directory, and making a list of all the matches. This is called globbing.
You could do this using fnmatch, by reading the directory entries
one by one and testing each one with fnmatch. But that would be
slow (and complex, since you would have to handle subdirectories by
hand).
The library provides a function glob to make this particular use
of wildcards convenient. glob and the other symbols in this
section are declared in `glob.h'.
glob
The result of globbing is a vector of file names (strings). To return
this vector, glob uses a special data type, glob_t, which
is a structure. You pass glob the address of the structure, and
it fills in the structure's fields to tell you about the results.
This data type holds a pointer to a word vector. More precisely, it records both the address of the word vector and its size.
gl_pathc
gl_pathv
char **.
gl_offs
gl_pathv field. Unlike the other fields, this
is always an input to glob, rather than an output from it.
If you use a nonzero offset, then that many elements at the beginning of
the vector are left empty. (The glob function fills them with
null pointers.)
The gl_offs field is meaningful only if you use the
GLOB_DOOFFS flag. Otherwise, the offset is always zero
regardless of what is in this field, and the first real element comes at
the beginning of the vector.
Function: int glob (const char *pattern, int flags, int (*errfunc) (const char *filename, int error-code), glob_t *vector_ptr)
The function glob does globbing using the pattern pattern
in the current directory. It puts the result in a newly allocated
vector, and stores the size and address of this vector into
*vector-ptr. The argument flags is a combination of
bit flags; see section Flags for Globbing, for details of the flags.
The result of globbing is a sequence of file names. The function
glob allocates a string for each resulting word, then
allocates a vector of type char ** to store the addresses of
these strings. The last element of the vector is a null pointer.
This vector is called the word vector.
To return this vector, glob stores both its address and its
length (number of elements, not counting the terminating null pointer)
into *vector-ptr.
Normally, glob sorts the file names alphabetically before
returning them. You can turn this off with the flag GLOB_NOSORT
if you want to get the information as fast as possible. Usually it's
a good idea to let glob sort them--if you process the files in
alphabetical order, the users will have a feel for the rate of progress
that your application is making.
If glob succeeds, it returns 0. Otherwise, it returns one
of these error codes:
GLOB_ABORTED
GLOB_ERR or your specified errfunc returned a nonzero
value.
GLOB_NOMATCH
GLOB_NOCHECK flag, then you never get this error code, because
that flag tells glob to pretend that the pattern matched
at least one file.
GLOB_NOSPACE
In the event of an error, glob stores information in
*vector-ptr about all the matches it has found so far.
This section describes the flags that you can specify in the
flags argument to glob. Choose the flags you want,
and combine them with the C operator |.
GLOB_APPEND
glob. This way you can effectively expand
several words as if they were concatenated with spaces between them.
In order for appending to work, you must not modify the contents of the
word vector structure between calls to glob. And, if you set
GLOB_DOOFFS in the first call to glob, you must also
set it when you append to the results.
GLOB_DOOFFS
gl_offs field says how many slots to leave.
The blank slots contain null pointers.
GLOB_ERR
glob tries its best to keep
on going despite any errors, reading whatever directories it can.
You can exercise even more control than this by specifying an error-handler
function errfunc when you call glob. If errfunc is
nonzero, then glob doesn't give up right away when it can't read
a directory; instead, it calls errfunc with two arguments, like
this:
(*errfunc) (filename, error-code)
The argument filename is the name of the directory that
glob couldn't open or couldn't read, and error-code is the
errno value that was reported to glob.
If the error handler function returns nonzero, then glob gives up
right away. Otherwise, it continues.
GLOB_MARK
GLOB_NOCHECK
glob returns that there were no
matches.)
GLOB_NOSORT
GLOB_NOESCAPE
If you use GLOB_NOESCAPE, then `\' is an ordinary character.
glob does its work by calling the function fnmatch
repeatedly. It handles the flag GLOB_NOESCAPE by turning on the
FNM_NOESCAPE flag in calls to fnmatch.
The GNU C library supports two interfaces for matching regular expressions. One is the standard POSIX.2 interface, and the other is what the GNU system has had for many years.
Both interfaces are declared in the header file `regex.h'.
If you define _GNU_SOURCE, then the GNU functions, structures
and constants are declared. Otherwise, only the POSIX names are
declared.
Before you can actually match a regular expression, you must compile it. This is not true compilation--it produces a special data structure, not machine instructions. But it is like ordinary compilation in that its purpose is to enable you to "execute" the pattern fast. (See section Matching a Compiled POSIX Regular Expression, for how to use the compiled regular expression for matching.)
There is a special data type for compiled regular expressions:
This type of object holds a compiled regular expression. It is actually a structure. It has just one field that your programs should look at:
re_nsub
There are several other fields, but we don't describe them here, because only the functions in the library should use them.
After you create a regex_t object, you can compile a regular
expression into it by calling regcomp.
Function: int regcomp (regex_t *compiled, const char *pattern, int cflags)
The function regcomp "compiles" a regular expression into a
data structure that you can use with regexec to match against a
string. The compiled regular expression format is designed for
efficient matching. regcomp stores it into *compiled.
It's up to you to allocate an object of type regex_t and pass its
address to regcomp.
The argument cflags lets you specify various options that control the syntax and semantics of regular expressions. See section Flags for POSIX Regular Expressions.
If you use the flag REG_NOSUB, then regcomp omits from
the compiled regular expression the information necessary to record
how subexpressions actually match. In this case, you might as well
pass 0 for the matchptr and nmatch arguments when
you call regexec.
If you don't use REG_NOSUB, then the compiled regular expression
does have the capacity to record how subexpressions match. Also,
regcomp tells you how many subexpressions pattern has, by
storing the number in compiled->re_nsub. You can use that
value to decide how long an array to allocate to hold information about
subexpression matches.
regcomp returns 0 if it succeeds in compiling the regular
expression; otherwise, it returns a nonzero error code (see the table
below). You can use regerror to produce an error message string
describing the reason for a nonzero value; see section POSIX Regexp Matching Cleanup.
Here are the possible nonzero values that regcomp can return:
REG_BADBR
REG_BADPAT
REG_BADRPT
REG_ECOLLATE
REG_ECTYPE
REG_EESCAPE
REG_ESUBREG
REG_EBRACK
REG_EPAREN
REG_EBRACE
REG_ERANGE
REG_ESPACE
regcomp or regexec ran out of memory.
These are the bit flags that you can use in the cflags operand when
compiling a regular expression with regcomp.
REG_EXTENDED
REG_ICASE
REG_NOSUB
REG_NEWLINE
Otherwise, newline acts like any other ordinary character.
Once you have compiled a regular expression, as described in section POSIX Regular Expression Compilation, you can match it against strings using
regexec. A match anywhere inside the string counts as success,
unless the regular expression contains anchor characters (`^' or
`$').
Function: int regexec (regex_t *compiled, char *string, size_t nmatch, regmatch_t matchptr [], int eflags)
This function tries to match the compiled regular expression
*compiled against string.
regexec returns 0 if the regular expression matches;
otherwise, it returns a nonzero value. See the table below for
what nonzero values mean. You can use regerror to produce an
error message string describing the reason for a nonzero value;
see section POSIX Regexp Matching Cleanup.
The argument eflags is a word of bit flags that enable various options.
If you want to get information about what part of string actually
matched the regular expression or its subexpressions, use the arguments
matchptr and nmatch. Otherwise, pass 0 for
nmatch, and NULL for matchptr. See section Subexpressions Match Results.
You must match the regular expression with the same set of current locales that were in effect when you compiled the regular expression.
The function regexec accepts the following flags in the
eflags argument:
REG_NOTBOL
REG_NOTEOL
Here are the possible nonzero values that regexec can return:
REG_NOMATCH
REG_ESPACE
regcomp or regexec ran out of memory.
When regexec matches parenthetical subexpressions of
pattern, it records which parts of string they match. It
returns that information by storing the offsets into an array whose
elements are structures of type regmatch_t. The first element of
the array records the part of the string that matched the entire regular
expression. Each other element of the array records the beginning and
end of the part that matched a single parenthetical subexpression.
This is the data type of the matcharray array that you pass to
regexec. It containes two structure fields, as follows:
rm_so
rm_eo
regoff_t is an alias for another signed integer type.
The fields of regmatch_t have type regoff_t.
The regmatch_t elements correspond to subexpressions
positionally; the first element records where the first subexpression
matched, the second element records the second subexpression, and so on.
The order of the subexpressions is the order in which they begin.
When you call regexec, you specify how long the matchptr
array is, with the nmatch argument. This tells regexec how
many elements to store. If the actual regular expression has more than
nmatch subexpressions, then you won't get offset information about
the rest of them. But this doesn't alter whether the pattern matches a
particular string or not.
If you don't want regexec to return any information about where
the subexpressions matched, you can either supply 0 for
nmatch, or use the flag REG_NOSUB when you compile the
pattern with regcomp.
Sometimes a subexpression matches a substring of no characters. This
happens when `f\(o*\)' matches the string `fum'. (It really
matches just the `f'.) In this case, both of the offsets identify
the point in the string where the null substring was found. In this
example, the offsets are both 1.
Sometimes the entire regular expression can match without using some of
its subexpressions at all--for example, when `ba\(na\)*' matches the
string `ba', the parenthetical subexpression is not used. When
this happens, regexec stores -1 in both fields of the
element for that subexpression.
Sometimes matching the entire regular expression can match a particular
subexpression more than once--for example, when `ba\(na\)*'
matches the string `bananana', the parenthetical subexpression
matches three times. When this happens, regexec usually stores
the offsets of the last part of the string that matched the
subexpression. In the case of `bananana', these offsets are
6 and 8.
But the last match is not always the one that is chosen. It's more
accurate to say that the last opportunity to match is the one
that takes precedence. What this means is that when one subexpression
appears within another, then the results reported for the inner
subexpression reflect whatever happened on the last match of the outer
subexpression. For an example, consider `\(ba\(na\)*s \)' matching
the string `bananas bas '. The last time the inner expression
actually matches is near the end of the first word. But it is
considered again in the second word, and fails to match there.
regexec reports nonuse of the "na" subexpression.
Another place where this rule applies is when `\(ba\(na\)*s
\|nefer\(ti\)* \)*' matches `bananas nefertiti'. The "na"
subexpression does match in the first word, but it doesn't match in the
second word because the other alternative is used there. Once again,
the second repetition of the outer subexpression overrides the first,
and within that second repetition, the "na" subexpression is not used.
So regexec reports nonuse of the "na" subexpression.
When you are finished using a compiled regular expression, you can
free the storage it uses by calling regfree.
Function: void regfree (regex_t *compiled)
Calling regfree frees all the storage that *compiled
points to. This includes various internal fields of the regex_t
structure that aren't documented in this manual.
regfree does not free the object *compiled itself.
You should always free the space in a regex_t structure with
regfree before using the structure to compile another regular
expression.
When regcomp or regexec reports an error, you can use
the function regerror to turn it into an error message string.
Function: size_t regerror (int errcode, regex_t *compiled, char *buffer, size_t length)
This function produces an error message string for the error code
errcode, and stores the string in length bytes of memory
starting at buffer. For the compiled argument, supply the
same compiled regular expression structure that regcomp or
regexec was working with when it got the error. Alternatively,
you can supply NULL for compiled; you will still get a
meaningful error message, but it might not be as detailed.
If the error message can't fit in length bytes (including a
terminating null character), then regerror truncates it.
The string that regerror stores is always null-terminated
even if it has been truncated.
The return value of regerror is the minimum length needed to
store the entire error message. If this is less than length, then
the error message was not truncated, and you can use it. Otherwise, you
should call regerror again with a larger buffer.
char *get_regerror (int errcode, regex_t *compiled)
{
size_t length = regerror (errcode, compiled, NULL, 0);
char *buffer = xmalloc (length);
(void) regerror (errcode, compiled, buffer, length);
return buffer;
}
Word expansion means the process of splitting a string into words and substituting for variables, commands, and wildcards just as the shell does.
For example, when you write `ls -l foo.c', this string is split into three separate words---`ls', `-l' and `foo.c'. This is the most basic function of word expansion.
When you write `ls *.c', this can become many words, because the word `*.c' can be replaced with any number of file names. This is called wildcard expansion, and it is also a part of word expansion.
When you use `echo $PATH' to print your path, you are taking advantage of variable substitution, which is also part of word expansion.
Ordinary programs can perform word expansion just like the shell by
calling the library function wordexp.
When word expansion is applied to a sequence of words, it performs the following transformations in the order shown here:
For the details of these transformations, and how to write the constructs that use them, see The BASH Manual (to appear).
wordexpAll the functions, constants and data types for word expansion are declared in the header file `wordexp.h'.
Word expansion produces a vector of words (strings). To return this
vector, wordexp uses a special data type, wordexp_t, which
is a structure. You pass wordexp the address of the structure,
and it fills in the structure's fields to tell you about the results.
This data type holds a pointer to a word vector. More precisely, it records both the address of the word vector and its size.
we_wordc
we_wordv
char **.
we_offs
we_wordv field. Unlike the other fields, this
is always an input to wordexp, rather than an output from it.
If you use a nonzero offset, then that many elements at the beginning of
the vector are left empty. (The wordexp function fills them with
null pointers.)
The we_offs field is meaningful only if you use the
WRDE_DOOFFS flag. Otherwise, the offset is always zero
regardless of what is in this field, and the first real element comes at
the beginning of the vector.
Function: int wordexp (const char *words, wordexp_t *word-vector-ptr, int flags)
Perform word expansion on the string words, putting the result in
a newly allocated vector, and store the size and address of this vector
into *word-vector-ptr. The argument flags is a
combination of bit flags; see section Flags for Word Expansion, for details of
the flags.
You shouldn't use any of the characters `|&;<>' in the string
words unless they are quoted; likewise for newline. If you use
these characters unquoted, you will get the WRDE_BADCHAR error
code. Don't use parentheses or braces unless they are quoted or part of
a word expansion construct. If you use quotation characters `'"`',
they should come in pairs that balance.
The results of word expansion are a sequence of words. The function
wordexp allocates a string for each resulting word, then
allocates a vector of type char ** to store the addresses of
these strings. The last element of the vector is a null pointer.
This vector is called the word vector.
To return this vector, wordexp stores both its address and its
length (number of elements, not counting the terminating null pointer)
into *word-vector-ptr.
If wordexp succeeds, it returns 0. Otherwise, it returns one
of these error codes:
WRDE_BADCHAR
WRDE_BADVAL
WRDE_UNDEF to forbid such references.
WRDE_CMDSUB
WRDE_NOCMD to forbid command substitution.
WRDE_NOSPACE
wordexp can store part of the results--as much as it could
allocate room for.
WRDE_SYNTAX
Function: void wordfree (wordexp_t *word-vector-ptr)
Free the storage used for the word-strings and vector that
*word-vector-ptr points to. This does not free the
structure *word-vector-ptr itself--only the other
data it points to.
This section describes the flags that you can specify in the
flags argument to wordexp. Choose the flags you want,
and combine them with the C operator |.
WRDE_APPEND
wordexp. This way you can effectively expand
several words as if they were concatenated with spaces between them.
In order for appending to work, you must not modify the contents of the
word vector structure between calls to wordexp. And, if you set
WRDE_DOOFFS in the first call to wordexp, you must also
set it when you append to the results.
WRDE_DOOFFS
we_offs field says how many slots to leave.
The blank slots contain null pointers.
WRDE_NOCMD
WRDE_REUSE
wordexp.
Instead of allocating a new vector of words, this call to wordexp
will use the vector that already exists (making it larger if necessary).
WRDE_SHOWERR
wordexp gives these
commands a standard error stream that discards all output.
WRDE_UNDEF
wordexp Example
Here is an example of using wordexp to expand several strings
and use the results to run a shell command. It also shows the use of
WRDE_APPEND to concatenate the expansions and of wordfree
to free the space allocated by wordexp.
int
expand_and_execute (const char *program, const char *options)
{
wordexp_t result;
pid_t pid
int status, i;
/* Expand the string for the program to run. */
switch (wordexp (program, &result, 0))
{
case 0: /* Successful. */
break;
case WRDE_NOSPACE:
/* If the error was WRDE_NOSPACE,
then perhaps part of the result was allocated. */
wordfree (&result);
default: /* Some other error. */
return -1;
}
/* Expand the strings specified for the arguments. */
for (i = 0; args[i]; i++)
{
if (wordexp (options, &result, WRDE_APPEND))
{
wordfree (&result);
return -1;
}
}
pid = fork ();
if (pid == 0)
{
/* This is the child process. Execute the command. */
execv (result.we_wordv[0], result.we_wordv);
exit (EXIT_FAILURE);
}
else if (pid < 0)
/* The fork failed. Report failure. */
status = -1;
else
/* This is the parent process. Wait for the child to complete. */
if (waitpid (pid, &status, 0) != pid)
status = -1;
wordfree (&result);
return status;
}
In practice, since wordexp is executed by running a subshell, it
would be faster to do this by concatenating the strings with spaces
between them and running that as a shell command using `sh -c'.
Go to the previous, next section.